3/27/2023 0 Comments Check pc power on time![]() ![]() The power supply is usually located on the back-top or back-bottom side of the PC case. You can access the entire motherboard once you remove one panel, and the other panel exposes a compartment that stores all the cables. Repeat the same process on the opposite side. Once you remove all the screws, gently take the panel out by sliding it outwards or taking it out at an angle. There should be three to five screws that hold the panel. We recommend you use a metallic tray to prevent the screws from being misplaced. To remove the side panel, unscrew any screws on the back or the side of the CPU case that is holding the panel in place. ![]() ![]() Also, press and hold the power button for five to ten seconds to remove any built-up charge from the capacitors. If you cannot access the PSU easily, follow the methods mentioned below to access and check the PSU wattage.īefore starting, make sure that you have removed the PC from a wall outlet. If you have this kind of PSU with a transparent side panel, check the readings on this LED panel to know your PSU wattage. Some PSUs even have an LED panel that shows the current power the PC uses, along with the PSU wattage. But, if you have an opaque side panel or cannot read the labels due to tinted side panels, you need to remove it to access the PSU. If you have a CPU case with transparent side panels, you may be able to check the PSU wattage from the outside. So you may need to open the PC case to access it. The label, however, can be located on either side of the PSU. You can usually find the PSU on the bottom and the back side of the case compartment. Here are two simple ways you can check your PSU wattage. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |